Spinning Tube Trick
This is an interesting phenomenon. Watch the video above to see the Spinning Tube Effect and see the reason it works below.
Alan Parekh
Arduino Data Visualization
If you have something in the real world that you would like to monitor this Arduino Data Visualization will help you to do just that. “Hardware: Arduino (We’re using the UNOr3) Ethernet Shield DHT22 Temperature + Humidity Sensor Hookup wires Angled pin headers (unless you use female-male hookup wires, then you won’t need these) 9v Wall Adapter Ethernet Cable Software: Latest Arduino software (1.0.5) Plotly Arduino Library Adafruit DHT
Crashed Ferrari Coffee Table
When a Ferrari is crashed and squished into a small metal cube what good is it? Well Charly Molinelli of Molinelli Designs used some creativity to make it an amazing coffee table. Via: TechEBlog
Robo-Raptor controlled by an Arduino
Long time maker Bob Davis has made a Robo-Raptor that is controlled by an Arduino. When the stock electronics in a product don’t do what you want just hack some new brains into them! This robot is from the pages of his book, Arduino Robotics Projects.
DSLogic – Open Hardware Logic Analyzer and More
 If you are in the market for a Logic Analyzer the DSLogic might fit the bill. At time of writing it is fully funded and you can get the early backer board for $49 (there are still 13 left). The next step up is $40 more and gets you the test clips and a USB cable, if you don’t mind making some test leads yourself you can save
CNC Macnine built using Floppy Drives
Richard Harris made a low cost micro CNC machine that uses old floppy drives for the movement. The video above is 10 in the series, if you would like to build you own you will need to start from video 1 which is here. It won’t do anything big, but what do you want for a machine built from parts that would normally be tossed out?
Pioneer Amplifier Repair and Volume Control Hack
Ian Johnston purchased a used Pioneer amplifier that was slightly defective. The amplifier would not function when the tone controls are switched in (this amp has a bypass switch which allows these controls to be bypassed). Turns out that the amplifier was fine, the issue was missing RCA Jumper Links , you can see what these jumpers normally look like in the picture below. This amplifier doesn’t have a