If you want to put on a complex fireworks show you need some way of controlling a bunch of fireworks with precision. This system has the ability of controlling 144 individual fireworks circuits! Have a look at the great build log, the system was built with some great care..
Thanks Dustin.
“I just finished building the main unit. It has a 144 cue capability; there are 48 on the main unit. I will have 4 slats with 24 cues each and 25-foot slat cables. I have tested the system and it fires commercial e-matches with no problem. I have not tested it with wire wrapped fuse yet but I do not think that I will have a problem with it.
The unit is in a Seahorse SE-520 Waterproof Case OSHA Yellow in color.
It has a custom made aluminum panel painted with black epoxy appliance paint and custom vinyl lettering.
My system is built off of two MadeinCHN boards. One of the boards is 433 MHz latching for slat selection the other board is 315 MHz momentary for cue firing. Both boards have selectable encoding via an 8 position Omron B.C.D. pushbutton switch. I have status leds letting me know that I am communicating between the transmitter and receiver. This is a nice little feature to have.”
Permalink
You’re welcome. Thanks for posting it.
Permalink
Nice work Dustin!
Looks like it’s getting to be about that time. Better start putting together a control box so it’s done by the 4th.
Permalink
thanks but it actually is my friend damion’s work. he is dboyette on pyrouniverse