If you have an unlimited budget this stair lighting system by Calum Gregge is amazing. Using RGB LEDs on this system combined with some creative light sequencing sure does look impressive.
Titan Homes is adding some cool stair lighting to some of their custom homes. Check out the video of the Reactive Lighting stair lighting system they install for their lucky customers. Austin demonstrates how the stair lighting controller can easily be configured by just flipping a few switches. A few of the many lighting sequences are demonstrated by using the random mode which looks like a lot of fun! They
Mike Szczys from Hack a Day shares a hack that he found by Geert on his Just a Thought blog. Geert wanted to jazz up his stairs but adding some DIY RGB LED stair lighting. He used an Arduino Uno for the brain and some TI TLC5940 chips to do the heavy lifting of doing the PWM (pulse width modulation) for all of the channels of LEDs. “We need a
Instructables member ganglion from England installed some LED stair lighting on his stairs. He built a custom DIY circuit that allows the lights to be dimmed. To make things a bit simpler he decided to only light every second step and simply run the wires on the edge of the stairs from top to bottom. We have seen other stair lighting systems like this one that have the wires run in
An automatic stair lighting system is one which lights each step LED when a user starts to climb or descend.  Erica Kane has developed a similar Open Source DIY Automated LED Stair Lighting system using an Arduino Pro Mini, a M5451 LED Display Driver to power the LEDs and a PING ultrasound distance sensors to detect when someone enters the stairwell. The Eagle schematic file is here and the Arduino Processing
Those who are having foot lights in their stairway, then acme663ryo has an interesting stuff for you. According to acme663ryo, your foot lights are having epoxy pools of glass in the knot holes. These can be triggered by any light motion sensor, which in turn drives a solid state relay. The relay during its active cycle switches your DC power supply ON and through which you can connect your LED lights. In
Instructables member ElJefeUno brought an awesome electronics project of building an Infra-red (IR) light trip sensor to light up your stairway. The sensor uses a directional IR LED beamed at a sensor that shoots past where you’ll walk. When you interrupt the light from the LED, the LEDs turn on for a period of time that you can adjust. Advantages of using IR LEDs includes: safe operation, low power consumption,
