UNI-T UT61E Backlight Touch Mod

    CubeAMSPro100 has completed a UNI-T UT61E Backlight Touch Mod which adds some interesting features to the UNI-T meter. With a wave of a hand over the top of the meter he can now command the backlight to turn on or off. This isn’t a simple hack and it involved installing a custom PCB to handle the magic.  

Add LED Backlight to a LCD Display

  Kerry Wong shows us how he makes some of his older gear a bit more usable by increasing the readability of the displays by Adding LED Backlight to the LCD Display. Turns out the LCD used some low intensity 5mm LEDs that were simply mounted in a way such that the light was directed through the rear of the display.    

Arduino Controlled Industrial Stepper

  AvE shows us that you don’t always need a complex expensive setup to drive industrial equipment. A simple Arduino setup is shown here to perform some simple stepper manipulation. The Arduino is connected directly to the Stepper driver which handles all of the complex microstepping etc. All the Arduino needs to do is enable it, chose a direction and pulse some steps at it. The result is a nice

POP Bottle Rockets

    Pop bottles normally find their way into the trash or recycling but if you have some time you can make some interesting rockets with them. The 2 stage water rocket above was launched to a height of 864 feet.   This one quick to build the rocket portion, most of the bottle work is for looks and a bit of stable flight purpose. The neck of the bottle

Heavy Lift MOT Magnet

  There are lots of uses for MOTs (microwave Oven Transformers).  The guys from Make it Extreme have come up with a great new use. Convert them to a Heavy Lift Magnet. They take a number of transformers, chop the top off the laminated core and weld them to a heavy base plate. They are then wired to a common power source and the surface of the transformer that will touch the

Gesture Controlled Lamp powered by Raspberry Pi

    This Gesture Controlled Lamp is powered by Raspberry Pi. An infrared camera is connected to the Raspberry Pi allowing the system to monitor for wand movements since the wand has an IR LED build into it. OpenCV is used to decipher the wand movements. There are a few simple gestures that are recognized to magically control the light. Via: Make “After a recent trip to Universal’s Wizarding World

Paper Airplane Gun version 2

    We have seen Paper Airplane making systems in the past, this one is super fast. Taking a stack of paper and jamming it through a set of rollers bending and folding as it goes makes for a very fast plane machine. The use is great, stack it full of flyers and fly them at your targets. Doing this from a tall building might be lots of fun! Via: